8 (812) 571-37-68
8 (3496) 42-00-24 Noyabrsk
8 (846) 207-56-90 Samara
Eng
Rus

Technology of Killing of Wells with Blocking Hydrophobic-Emulsive solution "СНК-2"

The proposed blocking hydrophobic-emulsive solution (СНК-2) is a well killing emulsion of inverse type with hydrocarbon external phase, which is immiscible both with fresh and brine waters.

СНК-2 is intended for killing wells during maintenance and overhaul of wells. Application of СНК-2 is effective in both clastic and carbonate reservoirs with hydrostatic level of pressure, with abnormally low reservoir pressure (ALRP) and with abnormally high reservoir pressure (AHRP).

Aggregately stable СНК-2 is used to kill wells. The composition is delivered as a complete emulsion and remains stable during transportation, storage and killing operation.

Killing of wells with the blocking hydrophobic-emulsive solution is carried out retaining oil production rate after repair works, as well as the ease of wells completion.

"СНК-2"

Purpose

The technology is designed to kill oil and gas wells during maintenance and overhaul

Geological and physical criteria for the effective application of the technology of killing with the blocking hydrophobic-emulsive composition.


No.

Name of criterion

Characteristics

1

Type of collector

terrigenous, carbonate

2

Form of collector

porous, fractured-porous

3

Permeability

not limited

4

The depth of the reservoir

not limited

5

Reservoir temperature

20-100°C

6

Reservoir pressure, MPa

0.8 - 1.5 by the hydrostatic

7

Gas factor, m3/m3

< 500

8

Reservoir thickness, m

> 2

9

Stage of development

middle, late

10

Oil viscosity

not limited

11

The mineralization of brine water

not limited

12

Type of water

any


Technological characteristics of compositions

No.

Name of factor

Value

1

Tamperature Stability, °C

<95

2

Density, g/cm3

0.85 - 1.4

3

Viscosity (at a shear rate 7.3-73.2, sec-1) mPa*s

200 - 3000

4

Static shear stress, DPA:

1 minute of rest;

10 - 50

in 10 minutes of rest.

20 - 100

5

Filter factor on the VM-6 cm 3 in 30 minutes

<5

6

Reduction factor core permeability,%

> 80

7

Corrosivity (at 800C), g / cm3 * h

<1

The composition, used in the technology, uncludes:

  • surface-active substance;
  • hydrocarbon solvent;
  • A solution of saline water and mineral salts.

Methodical support

When calculating the volume of killing fluid the structural, mechanical and rheological characteristics of the СНК-2, geological and physical characteristics of the reservoir and the well design are taken into account. The optimum amount of killing fluid is set using "The calculation of the optimum volume at killing of oil wells" program.

Applicable equipment

During the process of killing of wells the following technical means are used:

  • units for preparation of inverse emulsions УОЭ-1
  • mobile pumping unit: pump truck or AN-700;
  • Road tank car and its analogs.

Patent and legal protection of the technology

The technology is based on patents №2126082, №2152972, №2156269

Any questions?